Sennheiser EM2050 Dual Channel Rackmount Receiver

Equipped with the same features as EM 2000 but designed as a twin receiver, EM 2050 makes it possible for the RF signal to be looped through with the help of an integrated active splitter. With this design, you can set up systems with up to 16 channels without using external splitters. An integrated equalizer and guitar tuning device complete the package.

Features

• Rugged 19" all-metal housing with integrated power supply unit
• Up to 3000 frequencies in up to 75 MHz switching bandwidth
• 20 fixed frequency bands with up to 64 compatible presets
• 6 banks each with up to 64 tunable channels
• True diversity technology for best reception quality
• Integrated antenna splitter for cascading up to 8 devices without using additional splitters
• Pilot tone squelch for interference-free operation
• Scan feature within the channel band system
• Continuous scanning together with Sennheiser’s Wireless Systems Manager
• Frequency setting in 25 kHz steps
• Squelch setting always visible on the display
• Antenna cables for active antenna supply
• Transformer-balanced audio outputs
• HDX noise reduction system with signal-to-noise ratio less than 120 dB(A)
• Ethernet for connecting to a PC
• Monitoring and control using Sennheiser WSM PC software
• User-friendly menu interface with two-color backlit graphic display (red as a warning)
• Transmitters can be configured from the receiver menu
• Transmitters can be synchronized over the infrared interface
• 4 selectable equalizer presets
• Soundcheck mode for monitoring transmission conditions
• Adjustable headphone connection

Delivery Includes

• EM 2050 stationary twin receiver
• 3 mains cables (EU, UK, and US)
• 2 rod antennas
• 4 self-adhesive device feet
• Instruction manual
• Supplementary frequency sheet
• Supplementary RF power sheet

Technical Data

RF frequency range	516 - 865 MHz
Carrier frequency	max. 3,000
Presets	max. 64
Switching bandwidth	max. 75 MHz
Peak deviation	± 48 kHz
Squelch	off, 5 - 25 dBμV can be set in 2 dB steps
Intermodulation spacing	≥ 75 dB
Antenna connector	2 BNC (50Ω)
Cascadable	2 BNC (50Ω)
Gain	0 dB ±0.5 dB based on antenna inputs
Compander	HDX
Frequency response	25 - 18,000 Hz
Signal-to-noise-ratio	> 120 dB(A)
Total harmonic distortion (THD)	< 0.9%
XLR connector	2 x XLR-3 + 2 x 6.3 mm jack
Audio output level (balanced)	+18 dBu max Setting range: 49 dB in 1 dB steps + 6 dB gain reserve
Booster	12 V DC, 2 x 200 mA Short-circuit proof
Operating temperature	-10 °C - + 55 °C
Power supply	100 - 240 V AC, 50/60 Hz
Current consumption	max 0.25 A
Dimensions (receiver)	217 x 483 x 43 mm
Weight (receiver)	2,900 g

Product rating:	*	Excellent! Very good Good Fair Poor
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):
		Rate It!