Lectrosonics ALP650 "Shark Fin" Antenna

Log Periodic Dipole Array (LPDA) antennas provide a useful directional pattern over a broad frequency bandwidth (500 - 800 MHz) Constructed of 1/8” FR4 fiberglass and are extremely rugged. Ideal for portable applications including temporary setups for field production. ALP650 Series with RF amplifier Pattern Gain: +7dBi (isotropic) +4dBd (over dipole Passband: ALP650L 470.000 - 692.000 MHz ALP650 537.000 - 767.000 MHz ALP650L/E (RoHS compliant) 470.000 - 692.000 MHz ALP650M/E (RoHS compliant) 537.000 - 768.000 MHz ALP650H/E (RoHS compliant) 640.000 - 862.000 MHz RF Gain: +12 dB with 0dB attenuator +8 dB with 4dB attenuator +5 dB with 7dB attenuator Third Order Intercept: +27 dBm @ input (+41 dBm output) Weight: 12 oz. (all versions) All Models Power Requirements: 8V to 16V DC at the input jack; auto reset poly fuse protection circuit; constant power switching supply

• 8V DC (125 to 145 mA)
• 12V DC (83 to 106 mA)
• 14.4V DC (69 to 89 mA)
• 16V DC (60 to 80 mA) Phantom Powering: DC voltage supplied via coaxial cable by UMC16B, VRM input jack or BIAS-T power inserter (70 to 80 mA) Power Consumption: 1 Watt nominal (switching regulator) If

CONSUMER ALERT

Most users do not need a license to operate this wireless microphone

system.  Nevertheless, operating this microphone system without

license is subject to certain restrictions:  the system may not cause

harmful interference; it must operate at a low power level (not in

excess of 50 milliwatts); and it has no protection from interference

from any other device.  Purchasers should also be aware that the FCC

is currently evaluating use of wireless microphone systems and these

rules are subject to change.  For more information, call the FCC at

1-888-CALL-FCC (TTY: 1-888-TEL-FCC) or visit the FCC’s

wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

Product rating:	*	Excellent! Very good Good Fair Poor
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):
		Rate It!