With an overall length of just 9.17 and weight of just 3.5 oz, this
microphone adds virtually no heft to the end of a fish pole or the top
of a minicam. Through the use of an innovative Audio-Technica design,
the interference tube of the BP4073 provides a narrow acceptance angle,
effective for long-distance pickup. The highly directional mics offer
low self-noise and are fully RoHS-compliant free from all substances
specified in the EU directive on the reduction of hazardous substances
(RoHS).
- Designed for use in broadcasting, film/TV production and theater sound reinforcement applications
- Direct-coupled, balanced output ensures a clean signal even in high-output conditions
- Innovative acoustic design provides same directivity as mics up to 50% longer
- Switchable 80 Hz hi-pass filter & 10 dB pad
- Rugged housing made of lightweight structural-grade aluminum alloy
- RoHS-compliant free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
| ELEMENT |
Externally polarized (DC bias) capacitor |
| POLAR PATTERN |
Line + gradient |
| FREQUENCY RESPONSE |
20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY |
-29 dB (35.5 mV) re 1V at 1 Pa |
| IMPEDANCE |
50 ohms |
| MAXIMUM INPUT SOUND LEVEL |
141 dB SPL, 1 kHz at 1% T.H.D.;
151 dB SPL, with 10 dB pad (nominal) |
| NOISE |
13 dB SPL |
| DYNAMIC RANGE (typical) |
128 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
81 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS |
48V DC, 4.8 mA typical |
| SWITCHES |
Flat, roll-off; 10 dB pad (nominal) |
| WEIGHT |
99 g (3.5 oz) |
| DIMENSIONS |
233.0 mm (9.17") long,
21.0 mm (0.83") maximum body diameter |
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED |
AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16
threaded adapter; AT8144 windscreen; two O-Rings; protective carrying
case |
| AUDIO-TECHNICA CASE STYLE |
SG2 |
There have been no reviews for this product.